- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。
- 紫外光(ultraviolet light)
- 准直光束(collimated beams)
- 中性密度滤光片(neutral density filters)
- 直径发散角乘积(diameter-divergence product)
- 折射率(refractive index)
- 折射(Refraction)
- 衍射极限光束(diffraction-limited beams)
- 衍射光栅(diffraction gratings)
- 谐振腔模式(resonator modes)
- 消色差光学(achromatic optics)
- 相干时间(coherence time)
- 相干(coherence)
- 透镜(lenses)
- 瞬时频率(instantaneous frequency)
- 双折射(birefringence)
- 束腰(beam waist)
- 梳状滤波器(rugate filters)
- 失真棱镜对(anamorphic prism pairs)
- 色散(dispersion)
- 色散(chromatic dispersion)
- 色差(chromatic aberrations)
- 散斑(Speckle)
- 瑞利长度(Rayleigh length)
- 瑞利散射(Rayleigh scattering)
- 群速度折射率(group index)
- 群速度色散(group velocity dispersion)
- 群速度(group velocity)
- 群时延色散(group delay dispersion)
- 群时延(group delay)
- 腔(Cavities)
- 平顶光束(flat-top beams)
- 偏振片(polarizers)
- 偏振拍长(polarization beat length)
- 偏振合束(polarization beam combining)
- 模式匹配(mode matching) 定义:
- 模式(modes)
- 亮度(Brightness)
- 棱镜(prisms)
- 数值孔径(numerical aperture)
- 焦距(focal length)
- 激光辐射的偏振(polarization of laser emission)
- 激光光束(laser beams)
- 回波损耗(return loss)
- 红外光(infrared light)
- 光子(photons)
- 光学密度(optical density)
- 光学厚度(optical thickness)
- 光通量(fluence)
- 光速(velocity of light)
- 光束质量(beam quality)
- 光束发散角(beam divergence)
- 光束参量乘积(beam parameter product)
- 光束半径(beam radius)
- 光强度(optical intensity)
- 光谱仪(spectrometers)
- 光谱(optical spectrum)
- 古依相移(Gouy phase shift)
- 高斯光束(Gaussian beams)
- 高阶模式(higher-order modes)
- 分束器(beam splitters)
- 菲涅尔方程(Fresnel equations)
- 反射镜(mirrors)
- 法拉第旋光器(Faraday rotators)
- 法拉第隔离器(Faraday isolators)
- 厄米高斯模式(Hermite-Gaussian modes)
- 超光速传输(superluminal transmission)
- 插入损耗(insertion loss)
- 布儒斯特窗(Brewster windows)
- 布拉格光栅(Bragg gratings)
- 不稳定谐振腔(unstable resonators)
- 波数(wavenumber)
- 波矢(wave vector)
- 波片(waveplates)
- 薄膜偏振片(thin-film polarizers)
- 傍轴近似(paraxial approximation)
- Sellmeier公式(Sellmeier formula)
- Kramers-Kronig关系(Kramers–Kronig relations)
- ABCD矩阵(ABCD matrix)
- 色散(dispersion)
- 色散(chromatic dispersion)
插入某一器件产生的功率损耗。
如果将某一光学器件插入到装置中,可能会在装置中或者光学表面产生一些损耗。例如:
- 光纤连接器,是一个机械接头或者熔接接头来连接两个光纤,而不是只用一根连续的光纤。由于有效模式面积不匹配或者类似效应,在非理想的表面会引起一些光学损耗。
- 在激光器的输出后面放置法拉第隔离器,是为了消除背向反射。在隔离器非理想抗反射涂层中会损耗一些功率,通常是由于寄生吸收或者散着。
插入损耗通常由分贝表征,即输出功率与输入功率比值取以10为底的对数后再乘以10. 例如,光纤连接器的插入损耗在0.5 dB左右。高质量的熔接接头可以使该值降为0.02 dB。
对于高功率装置,通常不希望插入损耗很大,一方面功率存在损耗,另外也会由于吸收的光会产生很强的热效应。